The Mindray Passport 12 is a patient monitoring system designed for the modern healthcare facility. The monitor comes standard with 3- or 5-lead ECG, Masimo SET, SpO2, 2 IBP, NIBP, respiration, temperature, and an integrated recorder, but is available with a range of modular parameter options for more advanced monitor functions. The ergonomic carrying handle and varied mounting options allow clinicians to use the monitor in a variety of care settings.
Incorporating the features that make monitoring easier – a 12.1” touchscreen display with optimal display visibility, quick-access menus, easy touch function keys, and multiple trend capabilities – the Passport 12m was made with the clinical user in mind. The 12m eases clinical workflow when paired with the T1 Transport Monitor/Module, by providing a multi-parameter module and transport monitor in one.
- 12-inch high resolution color touchscreen display.
- Displays up to 8 waveforms.
- Standard parameters include: 3- or 5-lead ECG, Masimo SET, SpO2, 2 IBP, NIBP, RESP, TEMP, and an integrated recorder.
- Features extensive data storage for trend data, alarms, events, and NIBP measurements up to 48 hours.
- Connects to BeneVision Central Station.
- Integrates with eGateway for communication to EMR.
- Defibrillator synchronization.
- Convenient, ergonomic carrying handle and multiple mounting options.
- Optional — Nellcor OxiMax SpO2.
- Optional — ST and Arrhythmia analysis with atrial fibrillation detection available.
- Optional — Wireless 2.4 GHz (802.11b/g/n) available.
Features & Specifications
Dimensions
| Height: |
11.7 in (29.7 cm) |
| Width: |
13.2 in (33.6 cm) |
| Depth: |
7.4 in (18.7 cm) |
| Weight: |
16.5 lbs (7.5 kg) (Without modules, batteries, accessories, and recorder) |
Display
| Type: |
Color TFT Display |
| Size (Diagonal): |
12 in (30.5 cm) |
| Resolution: |
800 x 600 |
Battery
| Type: |
Rechargeable Lithium-ion |
| Voltage: |
11.1 VDC |
| Capacity: |
4500 mAh |
| Run Time (Average): |
About 330 minutes when powered by two new fully-charged batteries |
| Charge Time: |
Less than 6 hours to 100% |
ECG
| Lead Set: |
3, 5, and 12-lead |
| Sweep Speed: |
6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s |
| Mindray Resolution: |
1 bpm |
| Mindray Accuracy: |
±1 bpm or ±1%, whichever is greater |
Resp
| Technique: |
Trans-thoracic impedance |
| Lead: |
Options are lead I and II |
| Measurement Range: |
Adult: 0 to 120 rpm; Pediatric/Neonate: 0 to 150 rpm |
| Resolution: |
1 rpm |
| Accuracy: |
7 to 150: ±2 rpm or ±2%, whichever is greater |
Masimo SpO2
| Measurement Range: |
1 to 100% |
| Resolution: |
1% |
| Response Time: |
≤ 20 s (PR 75 bpm, average time 8 s, SpO2 value rises from 60% to 95%) |
| Refreshing Rate: |
≤ 2 s |
| SpO2 Averaging Time: |
2-4 s, 4-6 s, 8 s, 10 s, 12 s, 14 s, 16 s |
| Accuracy: |
70 to 100%: ±2-3% |
Nellcor SpO2
| Measurement Range: |
1 to 100% |
| Resolution: |
1% |
| Response Time: |
≤ 30 s (PI > 0.3, no disturbance, SpO2 value sudden change within 70% – 100%) |
| Refreshing Rate: |
≤ 2 s |
| Accuracy: |
70 to 100%: ±2-3% |
NIBP
| Technique: |
Oscillometry |
| Mode of Operation: |
Manual, Auto and STAT |
| Heart Rate Range: |
40 to 240 bpm |
| Resolution: |
1 mmHg |
| Accuracy: |
Max mean error ±5 mmHg |
Temp
| Technique: |
Thermal resistance |
| Operating Mode: |
Direct mode |
| Measurement Range: |
32 to 122°F (0 to 50 °C) |
| Resolution: |
0.1 °C |
| Accuracy: |
±0.1 °C or ±0.2 °F (without probe) |
IBP
| Measurement Range: |
-50 to 300 mmHg |
| Resolution: |
1 mmHg |
| Accuracy: |
±2% or ±1 mmHg, whichever is greater (without sensor) |
The Mindray Passport 12 is a patient monitoring system designed for the modern healthcare facility. The monitor comes standard with 3- or 5-lead ECG, Masimo SET, SpO2, 2 IBP, NIBP, respiration, temperature, and an integrated recorder, but is available with a range of modular parameter options for more advanced monitor functions. The ergonomic carrying handle and varied mounting options allow clinicians to use the monitor in a variety of care settings.
Incorporating the features that make monitoring easier – a 12.1” touchscreen display with optimal display visibility, quick-access menus, easy touch function keys, and multiple trend capabilities – the Passport 12m was made with the clinical user in mind. The 12m eases clinical workflow when paired with the T1 Transport Monitor/Module, by providing a multi-parameter module and transport monitor in one.
12-inch high resolution color touchscreen display.
Displays up to 8 waveforms.
Standard parameters include: 3- or 5-lead ECG, Masimo SET, SpO2, 2 IBP, NIBP, RESP, TEMP, and an integrated recorder.
Features extensive data storage for trend data, alarms, events, and NIBP measurements up to 48 hours.
Connects to BeneVision Central Station.
Integrates with eGateway for communication to EMR.
Defibrillator synchronization.
Convenient, ergonomic carrying handle and multiple mounting options.
Optional — Nellcor OxiMax SpO2.
Optional — ST and Arrhythmia analysis with atrial fibrillation detection available.
Optional — Wireless 2.4 GHz (802.11b/g/n) available. Dimensions
Height: 10.9 (27.6 cm)
Depth: 5.4 in (13.7 cm)
Width:12.7 in (32.2 cm)
Weight: 4.5 kg (10 lbs) (Standard parameters configuration, including 2 lithium batteries and a recorder)
Input/Output Communications ECG Analog Output
Bandwidth (-3dB; reference frequency: 10Hz)
Diagnostic Mode: 0.05 to 150 Hz
Monitor Mode: 0.5 to 40 Hz
Surgical Mode: 1 to 20 Hz
ST Mode: 0.05 to 40 Hz
Maximum Transmission Delay: ≤30 ms
Sensitivity: 1V/mV ±5%
Pacer Enhancement
Amplitude: Voh≥2.5V
Width: 10ms±5%
Signal Rising and Falling Time: ≤100μs
Electrical Ratings
Power Supply: AC power, battery
AC Power: 100 to 240 VAC (±10%)
Current: 1.3 to 0.5 A
AC Power Input
Frequency: 50/60 Hz (±3Hz)
Environmental Conditions
Temperature Range Operating: 10°C to 40°C
Temperature Range Non-operating (storage): -20°C to 60°C
Humidity Range Operating: 15% to 95%, non-condensing
Humidity Range Non-operating (storage): 10% to 95%, non-condensing
Altitude Range Operating: -1,000 to 9,841 feet ASL)
1,074 hPa to 700 hPa
(806 mmHg to 394 mmHg)
Battery
Type: Chargeable Lithium-Ion, 11.1DVC, 4.5 Ah
Number of Batteries: 2
Run Time: 4 hours when powered by one new fully-charged battery (25°C, SpO2, ECG, disconnected from Temp cable, Auto NIBP measurements at intervals of 15 minutes)
8 hours when powered by two new fully-charged batteries (25°C, SpO2 sensor and ECG cable connected, Temp cable not connected Auto NIBP measurements at an interval of 15 minutes)
Charge Time: Less than 3 hours to 90%, and less than 4 hours to 100% when the monitor is off.
Less than 8 hours to 90%, and less than 12 hours to 100%when the monitor is on. Warranty:
For new products, please refer to the manufacturer’s website for details.
This product has been refurbished and tested to the highest quality standards by The PCB Medical. This Limited Warranty offered by PCB Medical covers defects in material or workmanship. This warranty extends to the original purchaser only and is nontransferable. The warranty begins the day the equipment is received. Please inspect your item(s) upon delivery. Any unauthorized service providers working on our equipment within the warranty period will void the warranty!
Our warranty periods are very based on product, a standard 30 day parts warranty is included with all refurbished parts unless stated otherwise on the quote/Invoice. Warranties begin from the documented date of receipt.
Our warranties do not cover any problem that is caused by: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration.
Our limited warranties are void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover).
PCB Medical will not provide any warranty coverage unless claims are made in compliance with all terms of the controlling warranty statement included with your product and you follow proper return procedure. To request warranty service, you will need to provide: 1. The invoice or other evidence of the date and place of purchase. 2. A description of the problem. 3. Contact our Customer Service Department to receive a Return Authorization Number (RMA#)
Shipping and Returns:
Damaged freight needs to be reported within 24 hours to file a claim. No merchandise may be returned without prior written authorization by PCB Medical.
No NEW merchandise may be returned unless authorization from manufacturer which could result in a restocking fee or no return at all, and customer is responsible for shipping expenses.
Return period for products is thirty (30) days from delivery or otherwise agreed upon.
The PCB Medical will test returned products returned and can impose a customer fee if the customer misrepresents the condition of the product.
CREDIT AND RETURN SHIPPING GUIDELINES
Order cancellations (after 24 hours) and returns are charged a 45% restocking fee. Damaged goods will receive credit dependent on the condition of the product, and customer is responsible for shipping expenses.
No credit will be issued if the item is non-returnable, such as a new product, custom or special order, or in the case that the item is damaged due to improper handling/packaging by the customer.
Shipping Charges: Customers are responsible for making sure items can be delivered into or outside of their facility without issue. For example, can a 53’ foot truck access your building? Failure to accommodate delivery can result in items not being delivered, additional fees, or return of equipment.
Basic Shipping Charge is for dock to dock shipping and/or liftgate service shipping. The items shipping dock to dock and/or liftgate are skidded/palletized items. It doesn’t not include inside delivery.
Residential shipping charge is for customer’s needing delivery in a residential area.
Inside delivery is for customer’s needing their purchase delivered inside the building. The item(s) will be delivered into the lobby only. They are not delivered into rooms/suites, elevators, or stairs.
Customers are responsible for disposing of packing materials.
If you are needing white glove delivery, please contact us directly at INFO@pcbhme.com
